The Improv slouch zipper bag, is a fun, yet stylish bag that is so much fun to sew. This is a great project to use up some of your scraps or left over jelly roll strips from your stash. You may experiment with different color range, use solid or prints, totally up to you.  

The construction of this bag is similar to the Marion bag that I posted a month ago, however since this bag is larger in size, the finished look is quite different than the Marion bag (this bag has more slouch look).

Watch the full video tutorial on my Youtube channel 

The Peony Slouch Zipper Bag Supplies and measurement :
Supplies :
Assorted quilt weight fabric strips (refer to measurements in the cutting instruction below) 
2/3 yard lining fabric
Nylon Zipper (at least 15" long)
1" D rings (2x)
1" Lobster clasp swivel hooks (2x)
1" adjuster slider 
Fusible Fleece
Fusible woven interfacing (pellon shapeflex 101)
Basing sewing notions

==============================================

Cutting 
~Front Exterior~
Cut 13-15 pcs of 18" x 2 1/2" strips 

~Back Exterior~
Cut one 18" x 9"
Cut one 18" x 12"

~Interfacing~
Cut two 15" x 15" fusible woven interfacing
Cut two 15" x 14 1/2" fusible fleece

~Lining~ 
Cut two 15" x 15" from the lining fabric

~Pockets ~
Cut two 15" x 8" from the lining fabric 

~Strap Anchor~
Cut one 5" x 4"

~Strap~
Cut one 60" (or desired length) x 4" strips

~Strap interfacing~
Cut one 59" (1" shorter than the length of your strap) x 2"

~Zipper Tabs~
Cut two 4"x width of zipper (fabric and interfacing)

If you have any questions about this project please do not hesitate to reach out to me.

Happy Sewing!!

The Olivia quilted patchwork tote bag is such a darling bag that will surely brighten up your day. This bag comes with 2 exterior pockets, and four interior pockets. 

The patchwork of this bag is made out of charm packs (5" squares), and you will need 16 pcs only. If you have some charm packs perhaps leftover from previous project, you can pull them out, or simply purchase a fresh new one from your favorite fabric line.

Check out the fulll tutorial on my YouTube channel and consider subscribing so you won't miss any future upload.

Finished tote bag measurements :
Approx : 15" x 14" x 4"

Supplies 
16 charm packs (5" squares) 
7/8 yard accent fabric (fabric C) 
1/2 yard lining fabric
Quilt batting (or interfacing of your choice)
1/4 yard backing fabric if using quilt batting(use cheap fabric, muslin, or scraps)
fusible woven interfacing (I used pellon SF101) 
nylon zipper (at least 8") 
4 D rings (1") 
1 set of magnetic snap 

Cutting measurements 

~Exterior~

To make the block :
Cut the charm packs into 3 1/2" x 5" (fabric A) and 1 1/2" x 5" (Fabric B)

Exterior Top
From Fabric C cut two 16 1/2" x 2 1/2"

Exterior bottom
From Fabric C cut  two 16 1/2" x 9"

Pocket Binding :
Cut 2 1/2" wide strip for the binding

~Interior~

Facing 
From fabric C  cut two 16 1/2" x 3"

Lining 
From lining fabric cut two 16 1/2" x 13 1/2"

Zipper pocket :
From the lining fabric cut two 11" x 9"

Slip Pocket
From the lining fabric cut two 16 1/2" x 8"

Straps
From Fabric C cut two 22" x 4"

Straps interfacing
From the fusible interfacing cut two 21" x 2"

Strap anchors 
From fabric C cut four 4" x 4"

Disclaimer : This post contains affiliate links

Happy sewing!!