This is the 3rd project for the Charming Project series,  and in this post I'm going to share this beautiful tote bag project with you.

The finished measurement of this tote is about 14" x 11.5", a nice mid size tote, that is not only adorable but also very functional.

Supplies 
16 pcs of Charm Pack
1/3 yard of fabric (for the accent and straps)
Fusible woven interfacing (I use Pellon shape flex 101) 
Fusible Fleece (I use thermolam Pellon TP971F) 
*Feel free to use interfacing of your choice 
1 Set of magnetic snap closure  
1 Nylon zipper (at least 7" long) 

**Disclaimer : This post contains affiliate links, which means I earn a small percentage of commission when you make a purchase through those links with no additional cost. Thank you for your support!

==Cutting==
*Front Exterior
Top accent strip 16.5" x 1.5" 

*Back Exterior
Top accent strip 16.5" x 1.5"
Lower accent 16.5" x 9.5"

*Lining 
16.5" x 15" (Cut 2x)

*Pockets 
Slip pockets 16.5" x 8" (cut 2x)
Zipper pocket 10" x 9" (cut 2x)

*Interfacing 
Fusible woven interfacing 16.5" x 15" (cut 2x for front and bag exterior)
Fusible Fleece 16.5" x 14.5" (cut 2x for front and bag exterior)

To start with, cut all 16x of the charm packs in halves

Piece them together with 1/4" of seam allowance

Sew the straps 

Attach the straps to the bag exterior pieces

Now work on the lining and the pockets

For detailed instructions, watch the video tutorial on my Youtube channel

Happy Sewing!

This is the 2nd project of the Charming Projects series, where I share with you four charming stuffs to make for this gifting season (although you can certainly make them for yourself ;)
1. The Charming Crossbody Purse
2. The Charming Pouch
3. The Charming Tote 
4. The Charming Wristlet Clutch

​In this post we will make this charming multi purpose pouch.

The finished measurements of this pouch is about 10" x 9"

Supplies 
10x pcs Charm Pack
1/3 yard lining fabric
Fusible Woven Interfacing 
Fusible Fleece
Nylon zipper (at least 12" long)  

Cutting
Lining 11.5" x 9.5" (cut 2x)
Fusible woven Interfacing 11.5" x 9.5" (cut 2x)
Fusible Fleece 11.5" x 9"

*Disclaimer : This post contains affiliate links, thank you for your support!

Cut 2x pieces of Charm Pack in halves

Lay out the patchwork for both exterior pieces.

Piece them together with 1/4" of seam allowance

Apply the interfacing (I use the combo of fusible woven interfacing and fusible fleece), then quilt your fabrics (optional).
​Now prepare the lining pieces

For the zipper you will need at least a 12" long zipper, mine is a bit too long, but it's okay since this is a nylon coil zipper, thus I can easily trim the excess zipper off.

Now go ahead and assemble your pouch by attaching the zipper first.

Watch the full video tutorial on my Youtube Channel 

Happy Sewing!

In this festive season, I'm bringing you these four lovely projects that you can make for your gifting list, that are simple enough yet still so much fun to make. You will need one full pack of Charm Pack (5" squares) for this project, they are widely available at retail fabric/ quilting stores , and online as well.

These are the projects that I am so excited to share with you
1. The Charming Crossbody Purse
2. The Charming Pouch
3. The Charming Tote (my favorite!)
4. The Charming Wristlet Clutch

Let's start with this Charming Crossbody Purse

The finished measurement of this purse is about 7.5" x 7.5"

The Supplies that you will need 
10x pcs of Charm Pack
1/3 yard of fabric for the lining and pockets
1/6 yard of fabric for the straps
Fusible woven interfacing  (I use Pellon shape flex 101) 
Fusible fleece  (I use thermolam Pellon TP971F) 
1" d rings (2x)  
1" adjuster slider 
1 set of magnetic snap closure 

*Disclaimer : This post contains affiliate links, thank you for your support!

Cutting

Lining 9.5" x 9.5" (cut 2x)
Strap 60" x 4"
Strap interfacing 59" x 2" (from the fusible woven interfacing)
Strap anchor 5" x 4"
Fusible woven interfacing 9.5" x 9.5" (cut 2x for the front and back exterior)
Fusible fleece 9.5" x 9" (cut 2x for the front and back exterior)
Slip Pocket 7.5" x 5.5" (cut 2x)

To make the patchwork you will need to layout 4 charm packs for both for both front and back exterior as shown below

Piece them together with 1/4" of seam allowance

Now apply the interfacing 

Use 2x pcs of charm pack for the flap (each for the exterior and the lining as well)

Attach the flap to the back exterior piece

Here is the measurements for the lining and the pockets 

Check out the full tutorial on my Youtube channel 

For the next project we will make this Charming Pouch. 
​Happy Sewing!