Update: I changed the measurements of panel 3 to 5 1/2" x 4 1/2" , to accommodate differences when installing the zippers, after you finished installing both front zipper pockets, measure the height of your front exterior, trim off the bottom part (if any excess) so that your front exterior panel will measure 8" tall

Many of you have made and really enjoyed the cellphone wristlet pouch that I shared earlier this year, so I decided to design another one, with more pockets, and an adjustable crossbody strap instead of  wristlet.

Finished purse measurements :Approx.  4 1/2" x 7 1/2" (11.4 x 19 cm)
Top zipper opening : Approx.  3 3/4" (9.5 cm) wide 

Features :
Zipper Closure
2 Front zipper pockets
1 External Slip pocket (at the back)
Adjustable Strap

As usual I shared the full video tutorial on my Youtube channel.
Watch the tutorial for the hardware installation here.

Disclaimer: This post may contain affiliate links; I earn a small percentage of commission when you make a purchase through those links with no additional charge. Thank you for your support!

Happy Sewing!!

The lanyard ID wallet is a fun, functional, and giftable little project for you to make. This little wallet comes with an ID slot (that can fit credit card size ID), a zipper compartment to keep extra cards or credit card, and a little zipper pocket to hold a chapstick, lip balm, or some coins, plus a keychain to hook your keys.

Finished wallet measurements : approx. 4 1/2" x 3 1/2" (11.4 x 9 cm)
Strap drop : 18" (45.7 cm)
​ 

Happy Sewing!!