The Double square in a square quilt project is a fresh, modern style quilt, inspired from the Modern square in a square quilt that I shared a while back. This time though, the pattern called for 7x half-yardage, instead of the pre-cut layer cake.
Finished quilt measurements : Approximately 57 1/2" x 66" (throw size).
Finished block : 9" x 9"
Follow me on Youtube, and subscribe so you won't miss any upload.
Disclosure : This post contains affiliate links, I may earn a commission when you make a purchase of qualifying items through any of those links.
Hope you enjoy this quilt tutorial. Happy Sewing.
The surprise me quilt wall hanging is an express and quite exciting charm pack project. There is no particular layout for the half square triangles blocks, hence each quilt would be unique and one of a kind.
Finished quilt measurements : Approx. 17 1/2" x 38 1/2" (44 x 96.8 cm)
This post may contain affiliate links. I earn a small percentage of commission when you make a purchase of qualifying items through any of these links with no additional charge. Thank you for your support.
Please enjoy, and happy quilting.
I'm so pleased to share another exciting scrap busting quilt project with you today. The spring casserole quilt is a rail fence style quilt that is relatively simple, yet very delightful and satisfying to make.
With this quilt, I mixed and matched lots of scraps, some are my favorites, some aren't; some are from high quality premium quilting fabrics, some are budget fabrics from chain stores; yet they all come together wonderfully.
Finished quilt measurements : Approx. 62.5" x 70.5" (158.7 x 179 cm)
This post contains affiliate links; I may earn a small percentage of commission when you make a purchase of qualifying items through any of these links with no additional charge. Thank you for your support.
I hope you enjoy this quilt project. Happy sewing.
Here's a new modern layer cake quilt pattern that I am so excited to share with you.
This quilt is super fun and relatively easy to make, and will make an express quilt top.
The finished measurements of this quilt are approx. 55 1/2" x 64", and for this quilt you will need a full set of layer cake.
For this quilt, I used the Carnaby Street by Maywood Studio layer cake set, that I purchased from an Etsy shop.
Disclaimer : This post may contain affiliate links; I may receive a small percentage of commission when you make a purchase through any of those links. Thank you for your support.
Watch the full video tutorial on my Youtube channel.
Binding a quilt is the last step in quilt making, and to me, it's the most fun part, because I am one step closer in getting a new quilt.
As many of you reached out and asked me questions related to quilt binding, I decided to make a full tutorial on how to bind a quilt, from determining how many strips you need, cutting and joining the strips. attaching the binding, joining the binding ends, and finishing the binding.
You may watch the tutorial on how to bind a quilt on my Youtube channel by clicking the button below.
Disclaimer : This post may contain affiliate links. I receive a small percentage of commission when you make a purchase of qualifying items through those links with no additional costs. Thank you for your support!
This quilt is a variation of the Crazy Scrap Quilt 1 project that I shared about a year ago, in this project we will do the same scrappy block piecing method, with additional half square triangle tweak.
Finished Quilt measurements : 74 1/2" x 74 1/2"
Block Measurements : 12" x 12"
This is a wonderful project to use up your fabric scraps, that will yield to a generous size quilt with fresh and modern look.
I hope you enjoy this quilting project.
The Square in a Square pillow and table runner/wall hanging is an amazing pair that will brighten up your room. This is a great project to use up some of your favorite charm pack stash, pretty simple yet of course, so much fun to make.
In creating the blocks, I used the same principle as the Modern Layer Cake Square in a Square quilt tutorial that I shared last winter, which has gotten many positive feedback, however with this project we will use charm pack or the 5" square pre cut fabric.
You may download the pattern and watch the video tutorial by clicking the buttons below.
For the pillow, you will need an 18" x 18" pillow form, and the cover comes with a zipper closure, for easier care.
The measurements of the Table Runner is approximately 15" x 30" and will also look great as a wall hanging.
This post contains Amazon Affiliate links, which means I earn a small percentage of commision when you make a purchase through those links, with no additional cost. Thank you for your support.
Hope you enjoy this project. Happy Sewing!
Today I'd love to share with you my little quilty adventure. This wall hanging project came rather spontaneously. I was having a "creative block" moment where my brain was simply stuck and couldn't figure what to make or what my next move should be, so I stood by my cutting table, grab a couple scraps of fabric, and my rotary cutter, then started cutting, sew, and this quilt happened.
In this project you'll learn how to sew improv style "Quadrant" like curves, it may look intimidating at first if you haven't done it yet, but it is actually pretty simple, and since this is an improv quilt, accuracy is not in your agenda (although yes, we still need to square up each block to make it easier to assemble)
I posted the tutorial on my Youtube channel that you may watch here. or keep reading below for the list of supplies and written instruction.
Let's get started!!
(8x) 9" squares (medium/dark fabric)
(8x) 9" squares (light fabric)
Batting as needed
Backing fabric as needed
Basic sewing and quilting notions
1. Prepare your fabric as instructed in the list of supplies above.
2. Lay fabric A right side up, then lay fabric B right side up.
3. With your rotary cutter, make the quadrant shape cut from lower left-ish corner to the top-ish right corner.
4. Swap the layout of the fabric just like shown below.
5. Mark the center point of panel 1 and panel 2 with your fabric marker (it doesn't have to be precise, just estimate).
6. Lay panel 1 and panel 2 right side together, match the center point mark, pin.
7. Sew, starting from the center point mark, down to the edge, then flip the fabric, go back to the center point mark then sew down to the opposite edge. Align the edges of the fabric as you sew, panel 1 might turn out a bit shorter, which is okay.
8. Press the seams towards panel 1
9. Trim the block to measure 8" x 8"
10. Make 15 more blocks.
11. Layout your blocks as shown here.
12. Sew your quilt blocks together.
13. Layer with batting and backing fabric
14. Quilt as desired
15. Bind, add the hanging sleeve, enjoy.
The Tulips and Pinwheels quilt is a darling throw size quilt that will simply brighten up your day (especially in such unprecedented time like this), another way to ease our mind, is by picking up some pretty fabrics from our stash, and make a new quilt.
The finished measurements of this quilt is about 58.5" x 58.5", and each block measures 14" squares.
Let's get started!
10 Fat Quarters (3 dark, 3 Medium, 3 light color)
1 3/4 yard of background fabric
Quilt Batting as needed
1 3/4 yard of backing fabric (if using wide backing fabric)
1/2 yard of binding fabric
Basic Sewing and Quilting Notions
Making The Tulip Block
1. Cut the fabric pieces as shown in the picture below.
- Fabric 1 & 2 cut from dark/medium fabric
- Fabric 3,4,5 cut from light fabric
- Fabric 6 cut from background fabric
- Fabric 7 cut from dark/medium (contrasting with fabric 1&2)
2. Make 8x of Half Square Triangles (HST) by pairing fabric 1 & 3, trim the HST to measure 3.5" x 3.5" ==> Watch the video on how to sew the HST here.
3. Make 4x tulip units following the layout below. Once sewn, each tulip unit should measure 6.5" x 6.5"
4. Now layout all 4x tulip units with fabric 6, and 7 as shown below.
5. Piece the block, one row at the time. Your block should measure 14" x 14" . Make 8x blocks.
Making The Pinwheel Block
1. Cut the fabric pieces as shown in the picture below.
-Fabric 1 cut from dark/medium fabric
-Fabric 2 cut from light fabric
-Fabric 3 & 4 cut from background fabric
2. Make 4x HST by pairing fabric 1 & 2 exactly the same way as when making the tulip block. Trim the HST to measure 3.5" x 3.5".
3. To make the pinwheel block arrange the HST as shown below. Once sewn your pinwheel unit should measure 6.5" x 6.5"
4. To make the block, layout your pinwheel unit, with fabric 3 & 4, as shown in picture below. Once sewn, your block should measure 14" x 14". Make 8x blocks.
Assembling the quilt blocks
1. Alternate the tulip block with the pinwheel block, in 4 rows, each row should have 4 blocks. Refer to the picture below.
2. Sew your quilt blocks together, one row at the time.
1. Cut the following strips from the background fabric
Border 1 ( for the top and bottom of the quilt) : 54.5" x 2.5" (2x)
Border 2 (for the sides of the quilt) : 58.5" x 2.5" (2x)
2. Sew border 1 to the top and the bottom part of the quilt.
3. Sew border 2 to both sides of the quilt.
Once you've assembled your quilt top, go ahead and layer your quilt with the batting and the backing fabric, baste, then quilt and bind as desired.
In today's post, I would love to share this oh so lovely modern quilt that I call The Scattered Windows. This quilt is made with layer cake, or the 10" squares. The Fabric that I used for this quilt is the Sugarcreek from Moda Fabrics, I love the beautiful fresh color combination of this line of fabric, perfect for spring/summer.
This quilt is pretty simple and so much fun to make, and the result will simply brought a smile on your face :).
Let's Get Started!
The Scattered Windows Layer Cake Quilt
Finished Quilt Measurements : 60.5" x 70.5"
1 set of layer cake (10" squares pre cut fabric 42x)
1 yard of accent fabric for the sashing
1/2 yard of fabric for the binding
Basic sewing and quilting notions
Disclaimer : This post contains Amazon Affiliate Links, which means I earn a small percentage of commission when you make a purchase (with no additional cost), thanks for your support!
I posted the full video tutorial on my Youtube channel, that you may watch below, or scroll down to read the written instructions.
1. Layout your layer cake straight on the cutting mat, measure 6" then cut
2. Rotate your cutting mat at 90˚. The cutting line should now in horizontal position.
3. Measure 6" and cut, you should now end up with 4 block pieces.
4. Cut all of your layer cake squares the same way (you should end up with 42x of each fabric A,B,C, and D.
5. Cut 1.5" strips (width of fabric) from your accent fabric. You will need approximately 22 strips.
6. Cut the sashing strips according to the below measurements (make 42x each)
7. To make the quilt block layout your pieces just like shown on the picture below.
8. Piece the block by sewing fabric A-1-B, C-2-D, then sew the sashing 3. The fished block should be 10.5" x 10.5"
9. Continue piecing your blocks (you should end up with 42 blocks).
10. Layout your blocks in 7 rows and 6 columns, in scattered order (do not align the sashing between the blocks)
11. Sew your quilt blocks together, one row at the time.
12. Layer with batting and backing fabric
© Yoan Sewing Studio | All Rights Reserved