4 Charming projects with 1 charm pack - The charming Crossbody purse

4 Charming Projects with 1 Charm Pack

In this festive season, I'm bringing you these four lovely projects that you can make for your gifting list, that are simple enough yet still so much fun to make. You will need one full pack of Charm Pack (5" squares) for this project, they are widely available at retail fabric/ quilting stores , and online as well.

These are the projects that I am so excited to share with you
1. The Charming Crossbody Purse
2. The Charming Pouch
3. The Charming Tote (my favorite!)
4. The Charming Wristlet Clutch

Let's start with this Charming Crossbody Purse

The finished measurement of this purse is about 7.5" x 7.5"

The Supplies that you will need 
10x pcs of Charm Pack
1/3 yard of fabric for the lining and pockets
1/6 yard of fabric for the straps
Fusible woven interfacing  (I use Pellon shape flex 101) 
Fusible fleece  (I use thermolam Pellon TP971F) 
1" d rings (2x)  
1" adjuster slider 
1 set of magnetic snap closure 

*Disclaimer : This post contains affiliate links, thank you for your support!

Cutting

Lining 9.5" x 9.5" (cut 2x)
Strap 60" x 4"
Strap interfacing 59" x 2" (from the fusible woven interfacing)
Strap anchor 5" x 4"
Fusible woven interfacing 9.5" x 9.5" (cut 2x for the front and back exterior)
Fusible fleece 9.5" x 9" (cut 2x for the front and back exterior)
Slip Pocket 7.5" x 5.5" (cut 2x)

To make the patchwork you will need to layout 4 charm packs for both for both front and back exterior as shown below

Piece them together with 1/4" of seam allowance

Now apply the interfacing 

Use 2x pcs of charm pack for the flap (each for the exterior and the lining as well)

Attach the flap to the back exterior piece

Here is the measurements for the lining and the pockets 

Check out the full tutorial on my Youtube channel 

For the next project we will make this Charming Pouch. 
​Happy Sewing!